26
8.5.11. Child Lock Function
This function serves to prevent unintended changes of your settings
you have made on your oven clock. This function is activated 30 seconds
after the pressing of the last button and the
symbol is displayed on
the screen. The button is pressed for 3 seconds to cancel the child
lock and the symbol disappears.
8.5.12. Programmable Options
8.5.12.1. Alarm Tone Setting
While no setting mode is active, the button is pressed for 3 seconds
and the active tone is heard, and 3 different tones may be set by press-
ing the and buttons. Tone that was last heard is saved as applica-
ble.
You may end the setting by pressing the button. If this button is
not pressed
, setting mode shall be cancelled automatically after about 6
seconds.
8.5.12.2. Brightness Setting
While no setting mode is active, the button is pressed for 3 seconds
and the active brightness
setting is displayed.8 different brightness set-
tings may be set by pressing the and buttons. Brightness that was
last seen is saved as applicable. You may end the setting by pressing
the button. If this button is not pressed, setting mode shall be can-
celled automatically after about 6 seconds.
Remark: Default settings are the highest levels.
Remark: Programmable options shall remain in the memory even if the
power is interrupted.
GB
To Next Page
Loading...
