Simmons SD600 User Manual

10
OWNER’S MANUAL
ASSEMBLING YOUR KIT
BASS DRUM AND HI-HAT PEDAL
1. Place the hi-hat pedal on the oor and to the left, as illustrated below.
2. Connect the kick drum beater pedal to the front of the kick drum pad.
3. Place the bass pad and beater pedal on the oor in the center of the
rack as illustrated.

Simmons SD600 Specifications

General

User Kits	10
Metronome	Yes
Type	Electronic Drum Kit
Outputs	1 x 1/8" Headphone
USB	USB to Host
Effects	Reverb
Kick Pad	Yes
Hi-Hat Controller	Yes