Simmons SD7PK - ADJUSTING PAD LEVEL; SAVING USER KITS

11
www.simmonsdrums.net
The First Name in Electronic Drums.
adjusting pad level
Press the [VOICE] button until the LED display shows “Lxx”.
(xx=Levelvalue:0—32).Usethe[+] and [-] buttons to adjust the
level of the current pad.
Press the [VOICE]buttonuntiltheLEDdisplayshows“Pxx”.(xx=
Panvalue:-8—+8).Usethe[+] and [-] buttons to adjust the pan
of the current pad.
Press the [VOICE] button until the LED display shows “txx”.
(xx=Tuningvalue:-8—+8).Usethe[+] and [-] buttons to adjust
the tuning of the current pad.
Make sure you save your customized kit; otherwise, your changes
will be lost when you select another kit or turn off the SD7PK.
Kits 001 — 020 are factory presets. Customized kits can be saved
inUserkits021—050.
UserkitsstorealltheVoicesettings(Voicenumber,Level,Panand
Tuning) for all the pads.
TosaveyourcustomizedkittooneoftheUserkits:
1. Press the [SAVE]button.ThekitnumberashesontheLED.
2. Use the [+] or [-] buttons to set the User kit number
(021 — 050). The kit number will still be flashing.
3. Press the [SAVE] button again. The kit number stops flashing
and the SD7PK returns to Kit Mode.
Note:TocancelthesaveoperationwhiletheLEDisashing,
press the [KIT] or [VOICE] button.
adjusting pad pan
adjusting pad tuning
saving user kits