11. Using the installation tool, push the slider on the inside of the inlay back
to the home position.
IMPORTANT
Installation difficulties due to sliders
If you do not fully slide the slider to the home position, you will not be able
to lock the inner cover.
Push the slider completely to the home position!
12. Reapply the inner cover until it is flush with the door.
13. Reapply the inlay.
9 The inlay snaps back into place noticeably.
9 The batteries have been replaced.
Delivery from January 2016
1. Carefully insert the installation tool from below into the inlay of the in-
ner cover.
2. Slide the installation tool into the inlay to unlock the inlay.
SmartHandle (Manual)
13. Battery replacement
115 / 136
To Next Page
Loading...