Simons Voss Technologies SmartHandle Series - 5 Designs; Prerequisites

5 Designs
The following section describes the different individual versions or options
available for SmartHandle
5.1 Prerequisites
These distances depend on the version of the door.
Distance lock nut
front face (exterior
side) to exterior
side door leaf
Interior side Exterior side
The SmartHandle 3062 is suitable for the following distances:
Version Door thickness S Door thickness M Door thickness L
conventional/
SnapIn
min. 4 mm min. 4 mm min. 4 mm
RMO/RRMO min. 1 mm min. 1 mm min. 1mm
E1/SKG
No minimum thick-
ness
No minimum thick-
ness
No minimum thick-
ness
SO min. 1 mm min. 1 mm min. 1 mm
SmartHandle (Manual)
5. Designs
18 / 136