6 Storage
ATTENTION
Freeze mode due to separate storage
If you store the housing halves separately for a longer period of time (more
than a week), SmartHandle may switch to freeze mode.
Only separate the two halves of SmartHandle when installing it.
Storage mode
SmartHandle is screwed together in its box when delivered. The two
housing halves are firmly joined together. You can programme
SmartHandle directly as it is in the box.
After initial programming
Leave the housing halves screwed together after initial programming.
Installation
You need to separate the two housing halves to install SmartHandle. Do
not separate the two halves until just before you install it.
SmartHandle (Manual)
6. Storage
28 / 136
To Next Page
Loading...