7.3.4 Conventional fastening system
Key:
1. Inlay
2. Inlay
3. Outside handle
4. Outer fitting
5. Lock ring
6. Door lock (not included in the scope of supply)
7. Spacing bolt
8. Inside fitting
9. Screws
10. Upper battery
11. Inside handle
12. Inside hexagon screw
13. Inlay
14. Inlay
Installation:
1. Optional: Disassemble handles / escutcheons / fittings, etc. that are
mounted to the door.
2. SmartHandle is partly assembled when supplied; see "Disassembly".
3. The inlay cannot be fitted on some handles, such as offset handles,
when they are already installed. Push the inlay onto the outer handle
with the logo facing outwards in such cases. You can generally do this
with most handles.
SmartHandle (Manual)
7. Installation (manual)
45 / 136
To Next Page
Loading...