IMPORTANT
Specialist knowledge in door mechanics, door approvals, electronic system
installation and the use of SimonsVoss software is required to install the
system and put it into operation. Only trained specialists may install the
system.
IMPORTANT
Damage from unsuitable tool
Only use the SimonsVossfitting tool for assembly and battery changes.
IMPORTANT
Faulty orientation before fitting the conventional MO-version
The fastening holes and the spindle must be vertically aligned; otherwise,
you may not be able to install the fitting. Use the drill-hole template.
IMPORTANT
Effect of theSmartHandle 3062
The SmartHandle 3062 affects only the latch of the mortice lock.
IMPORTANT
Programming with obsolete LSM version
New components can only be programmed with the current version of
LSM.
IMPORTANT
Stiffness of the SmartHandle due to stiff mortice lock
If the mortice lock is stiff, the SmartHandle will also be stiff.
Check that the mortice lock is free-moving.
SmartHandle (Manual)
4. Product specific safety notices
16 / 136
To Next Page
Loading...