Simplex 300 User Manual

1
Push the SELECT button to position
the " " mark at the upper side of the
display next to the third item from
left, "Date". The "Year" is displayed
only with the last two digits.
A flashing number means that it
can be changed.
2
In the example, push the SET button
because the year 2001 is not to be
changed. Now the year of 2001 has
been set.
At that moment, the flashing of the
display will change from "Year" to
"Month".
3
In the example, push the SET button
because the month of October is not
to be changed. Now October has
been set.
At that moment, the flashing of the
display will change from "Month"
to "Date".
4
Change "Date" (for example, from
20 to 21)
Push the CHANGE button to set
"Date" at "21" and then push the
SET button, and now the date of 21
has been set.
At that moment, "Date" on the
display will change from flashing to
steady, and the date change setting
is now completed.
Setting the Date
SELECT CHANGE SET
'YY MM-DD
'YY=Year
MM=Month
DD=Date
DATE
SELECT CHANGE SET
'YY MM-DD
'YY=Year
MM=Month
DD=Date
DATE
SELECT CHANGE SET
'YY MM-DD
'YY=Year
MM=Month
DD=Date
DATE
SELECT CHANGE SET
'YY MM-DD
'YY=Year
MM=Month
DD=Date
DATE
To change the date
Example Change the date from October 20, 2001 to October 21, 2001.
Year
Month
Date
14

Simplex 300 Specifications

General

Brand	Simplex
Model	300
Category	Clock
Language	English