3-19
Table 3-4 describes the character set which can be used for creating Custom
Point labels.
Table 3-4. Custom Point Label Characters
Type of character Available Characters
Digits 0 - 9
Alpha A – Z and a - z
Punctuation space comma period
&
‘ ) ( * + - / :
Note: Press <Menu> to toggle between Upper and Lower
case characters. Press <
Disable/Enable> to insert
a blank space.
When an abnormal condition exists in the 4005, the system displays the
abnormal point automatically. After pressing <ACK>, you can disable that point
by pressing <
Disable/Enable>.
Note: You must be logged in at a Level 2 or greater to Disable/Enable
points.
Continued on next page
Control / View Points, Continued
Custom Point Label
Characters
Disabling an Active Point
Technical Manuals Online! - http://www.tech-man.com
To Next Page
Loading...
