The cursor will be flashing on the maximum entry number. Since all entry numbers begin with 0, a maximum
number of 19 represents 20 entries. Refer to the chart below to determine your Max. Entry No.
# Entries # Alternate Program Max. Entry No.
1-20 9 19 (default)
21-25 7 24
26-28 6 27
29-33 5 24
34-40 4 39
41-50 3 49
51-66 2 65
67-100 1 99
If your application requires 26 entries, enter 27 as the Max. Entry No.
Press [ENTER]. The display will respond as follows:
Since the Basic Plans begin with Plan 0, this means there are a total of 7 Plans available. Each will have 28
entries. To go back to the time display, press [EXIT].
7.4 ENTER SLEEP MODE [4] [5] [ENTER]
Sleep Mode is useful for suspending “Break Signals” during student testing, Summer school, meetings, and
other special events.
Sleep Mode can be selected from the keyboard. Press [4] [5] [ENTER] . The display will show:
To exit the Sleep Mode, press [4] [5] [ENTER] again. The 6500 will resume normal operation.
During “Sleep Mode” the 6500 ignores all Basic Plan programs (relay outputs are stopped). All other 6500
functions are still available such as entering programs, Changing time or date, manual relay control, etc. Sleep
Mode does not affect any stored programs.
7.5 STATUS [9] [0] [ENTER]
The master clock has a status check capability. Press [9] [0] [ENTER]. The display will show:
23
To Next Page
Loading...
Need help?
General
