Simplex 6500 User Manual

5.0 OPERATION
This section will explain how to change or review the existing time, date or programs previously stored, how or to
totally program the unit after exiting the AUTO-PROMPT sequence. It describes how to manually invoke each
mode from the command line. You must be in the time display before you can enter a command. Press the
[EXIT] key to be sure. The display should look similar to the following:
5.1 REVIEWING OR EDITING TIME [3] [ENTER]
Press the TIME key [3]. The display will respond with:
Press [ENTER]. The display will respond with:
Now you may enter the time as you would during the AUTO-PROMPT sequence. (see Section 4.3 APPLYING
POWER, ENTERING THE TIME)
5.2 REVIEWING OR EDITING THE DATE [D] [ENTER]
You must be in the time display in order to enter the date. Press the DATE key [D]. The display will respond
with:
Press [ENTER]. The display will respond with:
Enter the date as described in Section 4.4 ENTERING THE DATE.
14

Simplex 6500 Specifications

General

Brand	Simplex
Model	6500
Category	Clock
Language	English