Simplex SafeLINC 4100-6060 - Changing the Administrator Password

34
The administrator (User 1) has exclusive control over the administrator password. To change the
administrator password, follow the prompts in the Change Administrator’s Password section of
the screen. Note that passwords must be between 6 and 20 characters long and cannot contain any
spaces. Usernames and passwords are case-sensitive.
Note: The Administrator’s password is shared among multiple designated
Administrators.
IMPORTANT: For maximum security, change the Administrator’s password often,
especially when a user is no longer an employee.
HINT: If you forget the administrator’s password or login information for the User 1
account, you can reset/override these options via the boot prompt on the
Diagnostic Port. You should contact your local Simplex product representative to
assist you in making this change.
Login Accounts, Continued
Changing the
Administrator
Password