Simplicity 1003 - Identification; Accessories and Attachments

Identification
When requesting information or ordering replacement parts for your rotary tiller, be prepared to give your dealer the identifi¬
cation numbers found on the tiller and engine identification plates shown below. The tiller ID plate is located on the right-
hand side of the frame. The engine ID plate is located on the engine housing.
SIMPLICITY MANUFACTURING CO. I model type CODE
PORT WASHINGTON, Wl U.S.A.
Refer to ID no. when writing or ordering parts
ID NO. _
TILLER IDENTIFICATION PLATE ENGINE IDENTIFICATION PLATE
Accessories & Attachments
See your dealer to purchase any accessories or attachments available for your rotary tiller. The following will help make your
tilling jobs easier:
TINE EXTENSION KIT — increases tilling width FURROW OPENER — Opens furrows behind tiller to
6.5 inches (165 mm) on each side. plant crops in rows.
Models illustrated in this manual may vary slightly from the model you have.
.A..