EasyManua.ls Logo

SimPure HP8 - Health and Safety Precautions; Operating Parameters

SimPure HP8
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Health & Safety Information
SimPure
®
products are designed with safety in mind. However, personnel using
this
appliance must be familiar with any potential dangers. All safety Warnings
and Cautions
detailed in this handbook should be reviewed before installing
and
operating this appliance.
This product is not a toy; children must be supervised when using the
device. Keep packing materials out of children's reach.
-
The system has been designed for indoor use only. Install the air
purifier out of direct sunlight on a flat, level, dry, and secure surface
with average ambient room temperature.
-
This appliance is fitted with a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is intended to
fit in a polarized outlet only. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
-
To reduce the risk of fire or electric shock, do not use this fan with any
Solid-State speed control device.
-
Do not touch the power plug with wet hands. Do not use it if the
plug or power cord is damaged or the product is not working.
-
Do not use in heavy moisture or smoke. Please keep the device away
from flammable gas appliances such as heaters or fireplaces.
-
Unplug or disconnect the appliance from the power supply before
servicing or cleaning. Do not use strong corrosive detergents
of chemicals as they may damage the device's surface.
-
Do not obstruct the air inlets or outlets on the device. Do not wash or
reuse the composite filter Replace it with a new filter.
Failing to observe these Warnings could damage the equipment,
associated parts, surroundings, or cause personal injury.
Operating Guidelines
The following table lists the operating parameters for this product. Operating
this product outside these specifications may cause system performance issues
and may even lead to personal injury and void any warranty. Please contact
SimPure
®
for further advice and support.
Operating Parameters
Model
SimPure
®
HP8
Rated Voltage
120V ~ 60Hz
Rated Power
50 Watts
Dimensions
5.1 x 7.1 x 21.7 Inches
(130 x 180 x 550mm)
Application Area
Up to 600 ft
2
(55 m
2
) x5 Air changes per hr.
Sleep Mode Noise Level
23dB (A)
Operational Weight
12.2Ib (5.5kg)
Filter Element Type
A single composite filter element
Temperature & Humidity
Operating: 32-104℉ (0-40℃) 20-90%
Storage: 14-140℉ (-10-60℃) 20-90%
3
4

Other manuals for SimPure HP8

Related product manuals