Press the power button to turn the air purifier
off and unplug the electrical outlet's power
cord.
Remove the panel from the air purifier and take
out the exhausted composite filter element.
Clean out any remaining dust, dirt, or hair inside
the purifier using a vacuum hose or dry cloth.
DO NOT use water or liquids to clean the
purifier.
Important! Remove any packing from the new
filter element. Take notice that one side of the
filter is black in color
; this side needs to be facing
.
Refer to the new filter instructions
if unsure.
Place the new filter into the air purifier making sure
it is the correct way around. The black side of the
filter should be on the inside, closest to the fan.
Airflow travels from outside to the center of the
unit. Refit the purifiers panel, and plug the power
cord back into an electrical outlet.
Turn on the air purifier, hold down the filter button
for 3 seconds to reset the filter timer, the indicator
light will go out, showing the reset was successful.
The filter's actual lifespan may vary depending on the amount of dust, smoke,
humidity, and other airborne particles and vapors concentrated in the air.
Customer Service: service@simpurelife.com
Toll-Free Phone: 1-866-528-4572
Website: www.simpurelife.com
Register for warranty
Please register your product's warranty on
www.simpurelife.com. Find further information
on this product and other SimPure
®
products.
Sign up for our Newsletter to keep you informed
of new products and upgrades.
To Next Page
Loading...
