SimPure T1 - Installing Cartridges

• Installing Cartridges
The
cartridges must be loaded as follows,
or the system will not function
correctly. Please follow the instructions
:
Consumables Cartridges
Description
Part Number:
ASIN
A
PP Filter 5-micron (4-pack) *
RSMPP001Z_4S8
B
GAC 5-micron (UDF Filter) (4-Pack) *
IFGAC002Z_4M1
C
CTO Filter 5-micron (4-Pack) *
IFCTO005Z_4M3
D
Reverse Osmosis (RO) for 75 GPD model
RSRO004
D
Reverse Osmosis (RO) for 100 GPD model
RSRO005
E
T33 Filter 5-micron (3-Pack) *
RSIN002Z_3M1
*Please Note:
A SimPure® T1 RO consumable kit is available, which is shipped with 1
item of each filter (except the RO membrane) Please refer to the
replacing consumables
section for details when re
-ordering consumables.
The SimPure
®
T1 is supplied with the T33 filter already in place; you
just need to load the RO membrane element and three pre-treatment
cartridges
. Let’s start with the RO membrane element below.
•
RO Membrane Element Assembly
It
’s now time to install the SimPure
®
T1 RO membrane element.
17 18
RO Membrane Housing
RO Housing
B
A
E
D
A
B
C
C
D