Simrad FU80 User Manual

| 11
Operation | FU80, NF80, QS80 User Guide
Operation
Basic operation - all remotes
The keys
Key Short press Long press (3 seconds)
STBY
CMD
MODE
Take/request command
Activates/deactivates
thrusters *
STBY
CMD
MODE
Adjust illumination
Toggles day and night
display illumination
STBY
CMD
MODE
Turn the autopilot system to Standby mode
STBY
CMD
MODE
Toggle between available
modes
Displays the Main menu
(Standby mode only)
* Only available in AP60, AP70 and AP80 systems. The thrusters must
be available for autopilot steering in active steering profile. See the
autopilot’s Operator manuals for more information.
A long press is indicated with a progress bar. Keep the key pressed
until all segments are filled.
Softkeys
When the menu is active or when an alarm message is displayed,
the small icons below and above the keys indicate the function of
the key.
Softkey Key Function
STBY
CMD
MODE
OK/Accept/Acknowledge alarm
STBY
CMD
MODE
Cancel/Return to previous menu level
Mute alarm
STBY
CMD
MODE
Move upwards in menu
STBY
CMD
MODE
Move downwards in menu
3
STBY
CMD
MODE

Simrad FU80 Specifications

General

Brand	Simrad
Model	FU80
Category	Remote Control
Language	English