| 61
Maintenance | MX610/MX612 Operator and Installation Manual
Software upgrades
Software upgrade of the MX610/MX612 display unit and MX61xJB junction box can be ac-
complished using USB memory stick or a PC.
The latest software files for the MX610/MX612 and junction box can be downloaded from the
SIMRAD professional website: www.navico.com/commercial
MX610/MX612 CDU software update procedure (USB method)
1. Copy the *.upd file to a USB memory stick.
2. Insert the USB stick into the MX61X USB connector.
3. Turn off the MX61x unit by removing the power cable or turning off the circuit breaker to the
unit.
4. Reconnect the power cable (or turn on the circuit breaker), the s/w update will start automati-
cally.
5. At the end of the programming procedure, remove the USB memory stick.
6. Turn ON the unit.
7. Verify the software version number by pressing the MENU key.
8. Scroll down to Tool & Settings menu, press ENT.
9. Select the Systems icon, press ENT.
10. Scroll to About, press ENT.
11. End of procedure.
MX610/MX612 CDU Software Update Procedure using a PC
1. Copy the *.upd file to your PC (not a network location).
2. Connect the MX61x directly to your computer with a LAN network cable.
3. Completely cut the 12-24 VDC power to the MX61x unit by using the power supply switch or
circuit breaker.
4. Press and hold down the PAGE button (top left button above the rotary) and apply external
power to the unit. An IP address will be indicated on the CDU.
5. Launch the Internet Explorer (or other web browser) and type the IP address as shown on the
MX61x (i.e. http://192.168.0.1).
6. Browse to the file on your PC.
7. Click on upload.
8. The display unit will start the update process automatically after the upload.
9. End of procedure.
To Next Page
Loading...
