| 63
Maintenance | MX610/MX612 Operator and Installation Manual
¼ Notes:
1. It is important that the three MXJB gateways (or SI80 Pilot Controller) of the MX612JB be pro-
grammed one at a time to prevent conflicts.
2. Upgrading the MX610JB/MX612JB junction box software through the USB port of the MX61x
CDU may require an external 12 VDC supply to the NMEA 2000 bus (see the diagram above).
Software update of the junction box may fail if no external 12 VDC is applied.
To Next Page
Loading...
