EasyManuals Logo

Simrad NSS evo3 Software Upgrade Instructions

Simrad NSS evo3
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
| 13
Update procedure | Software upgrade instructions
¼ Note: There could also be other progress messages appear on screen.
Installing update. Please wait...
Do not trun o during update, as
this may damage your device
11 Once the upgrade is complete, the unit will reboot and start normally to the accept terms and
conditions notice.
¼ Note: Some updates may contain additional drivers or processes that will require additional
auto restarts.
12 Remove the media card.
¼ Note: Software versions 52.1.103 (evo2) or higher no longer boot to an update menu. To re-
run the same up-dater over the same version, this has to be done through the user interface.
(see “Method 3: Start Update through the Files menu” on page 14)

Other manuals for Simrad NSS evo3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Simrad NSS evo3 and is the answer not in the manual?

Simrad NSS evo3 Specifications

General IconGeneral
TouchscreenYes
NMEA 0183 ConnectivityYes
Operating SystemLinux-based
ChartplotterYes
Radar SupportYes
Waterproof RatingIPX7
Operating Temperature-15°C to +55°C
Display Size9, 12, 16 inches
Screen TypeLCD
GPS10 Hz built-in GPS receiver
NetworkingEthernet, Wi-Fi, Bluetooth
SonarCHIRP, StructureScan
Power Supply12V DC
Video Input2
Card Slots2 x MicroSD
ProcessorQuad-core processor
RAM1GB
Internal Storage8GB
Resolution1280 x 800 (12")

Related product manuals