Simrad NSS7 EVO3 COMBO Software Upgrade Instructions

8 |
Update procedure | Software upgrade instructions
Connect the MFD to the Internet
1 Access the Wireless settings page (HOME>SETTINGS>WIRELESS). Most current models of MFD
will have internal wireless. Make sure this is active (by default this is off)
2 Select the menu item “Connect to a wireless hotspot...” or “Not connected”
3 Choose the desired Hotspot
4 Enter the Password (network Key) then select connect
If there is a new version of software, the following will be presented. If this is the only MFD
on the network or you only want to update this MFD, then select “Download.” Or to update
remote MFDs or devices select “Go to Updates List”(see “” on page 10)

Simrad NSS7 EVO3 COMBO Specifications

General

Brand	Simrad
Model	NSS7 EVO3 COMBO
Category	Marine Equipment
Language	English