Need help?Do you have a question about the Simrad IS80 Heading Repeater HR80 and is the answer not in the manual?
General| Display Type | LCD |
|---|---|
| Data Input | NMEA 0183, NMEA 2000 |
| Operating Temperature | -15°C to +55°C |
| IP Rating | IPX6 |
| Storage Temperature | -25°C to +70°C |
| Humidity | 95% |
| Weight | 0.3 kg |
| Compatibility | Simrad |
| Input Voltage | 12/24V DC |
Instructions for flat and even mounting, including drilling and screw tightening precautions.
Details wiring connections to the terminal block, SimNet plug, and RS485 interface, including color codes.
Explains how to interconnect multiple instruments using SimNet power cables and T-joiners.
Guides on configuring the HR80 to select the input signal (SimNet, NMEA0183, Demo) before use.
Details the function of the two front keys for mode switching, parameter setting, and illumination adjustment.
Informs that a lit error indicator means the instrument is inoperable and requires service/repair.
Describes heading alignment for gyrocompass interfacing, referencing the GI51 manual and LED prompts.
To Next Page
