Simrad IS80 Heading Repeater HR80 - Heading reference

18 | Changing the default settings
Heading reference
True and Magnetic inputs are selectable as heading
reference for the HR80.
The active reference is indicated by a lit diode on the
instrument.
Default reference: True
Beep on/off
The HR80 has a buzzer, and when turned ON the
instrument will give a short beep when reading a heading
change of 1°.
Default value: On
ERROR
TRUE
MAG
A. 1
SELECT
MODE
SETUP
SELECT
+
1 s
3 s
- MODE 1
- MODE 2
MODE
SETUP
3 s
MAIN
MODES
USER
SETUP
- HEADING
REFERENCE
- BEEP
- HEADING
COMMAND
- LIGHT
BANK
SELECT
MODE
SETUP
SELECT
+
1 s
3 s
A. 1
- MODE 1
- MODE 2
MODE
SETUP
3 s
MAIN
MODES
USER
SETUP
- HEADING
REFERENCE
- BEEP
- HEADING
COMMAND
- LIGHT
BANK