Simrad IS80 Heading Repeater HR80 User Manual

Operation | 15
Maintenance
The HR80 instruments are “repair by replacement” units,
and the operator is therefore required to perform only a
very limited amount of preventive maintenance.
If the unit requires any form of cleaning, use fresh
water and a mild soap solution (not a detergent). It
is important to avoid using chemical cleaners and
hydrocarbons such as diesel, petrol etc.
If a weather cover is available this should be put on
when the unit is not in use.

Simrad IS80 Heading Repeater HR80 Specifications

General

Brand	Simrad
Model	IS80 Heading Repeater HR80
Category	Marine Equipment
Language	English