Simrad IS80 Heading Repeater HR80 - Light bank selection

20 | Changing the default settings
Light bank selection
The light bank function is used to globally control light
settings for group of units that are connected via the
SimNet network.
By assigning several units to the same group, the light
adjustment on one unit will be effective on the rest of
the members in the same group.
LIGHT BANK LCD POINTER BEEPS
Simrad
1
Group 1
1
Group 2
1
Group 3
1
Group 4
1
Group 5
1
Group 6
1
None
1
Default value: Simrad
SELECT
MODE
SETUP
SELECT
+
1 s
3 s
- MODE 1
- MODE 2
MODE
SETUP
3 s
MAIN
MODES
USER
SETUP
- HEADING
REFERENCE
- BEEP
- HEADING
COMMAND
- LIGHT
BANK