SIMTEC TRACSCAN 2.0 - Page 15

Operating Manual TRACSCAN 2.0
V2.0, 2022-05 15 / 36
Test Program NFSI B101.3-2020
Parameter Name Default Value Can be altered
Distance 15 cm

Required Test Foot Type SBR, see section [4].
Table 6: Test Program NFSI B101.3-2020
Test Program NFSI B101.1-2020
Parameter Name Default Value Can be altered
Scale / Standard NFSI B101.1-2020
COF Type SCOF
Wet Measurement Yes
Ramp Level, Only

Residence Time 0.1 s

Number of Samples 5

Discard 1
st
Sample Yes

Lift / Lower Between Samples No

Required Test Foot Type SBR, see section [4].
Table 7: Test Program NFSI B101.1-2020
Test Program ANSI A326.3-2017
Parameter Name Default Value Can be altered
Scale / Standard ANSI A326.3-2017
COF Type DCOF
Wet Measurement Yes

Ramp Auto Detect

Residence Time 0.1 s

Distance 15 cm

Required Test Foot Type Any
Table 8: Test Program ANSI A326.3-2017
Test Program German Ramp
Parameter Name Default Value Can be altered
Scale / Standard German Ramp