Sindoh M611 - Page 170

164
performing POR.
2. Replace the system card if the problem continues.
912
Software
Segmentation Fault
A system down due to an invalid access to memory area
during operation of the system software
1. Check the presence of the problem yet after
performing POR.
2. Replace the system card if the problem continues.
920
DB recovery
success
Successfully recovered from the damage.
1. Wait until the reboot is completed
923
DB recovery failure –
No backup DB
Fail to recover DB from the damage. No backup DB.
1. Check the presence of the problem yet after
performing POR.
2. Replace the system card if the problem continues.
924
DB recovery failure –
backup DB integrity
check fail
Fail to recover DB from the damage. Backup DB
damaged.
1. Check the presence of the problem yet after
performing POR.
2. Replace the system card if the problem continues.
925
DB recovery failure –
backup DB copy fail
Fail to recover DB from the damage. Fail to copy the
backup DB.
1. Check the presence of the problem yet after
performing POR.
2. Replace the system card if the problem continues.
930
Invalid RTC time
RTC time has been abnormally changed for reasons like
battery power loss.
1. Check the presence of the problem yet after
performing POR.
2. Replace the system card if the problem continues.
931
ODMA wait failure
The problem occurs when the image process has not
been completed within a certain time while generating
data to print.
1. Check the presence of the problem yet after
performing POR.
2. Replace the system card if the problem continues.