Singer 211W151 - Thread Tensions and Stitch Length; Thread Tensions Adjustment; Stitch Length Regulation

6
THREAD TENSIONS
Turn machine pulley until tension
screw is accessible.
Fi g. 17. Bob b in Thread Tension
Tension on threads should be as light
as possible while still sufficient to set
stitch in material.
Regulate needle thread tension only
when presser foot is down.
Fi g. 18. Needle Thread Tension
STITCH LENGTH REGULATION
1 . Stop machine •
2. Depress button shown in Fig. 19.
3. Turn machine pulley toward you
slowly- until button drops (clicks).
4. Turn machine pulley until desired
stitch length is opposite mark on
arm (see Fig. 20 ) .
5. Release button.
Never depress the button while the
machine is running.
Make certain that plunger is disengaged
before starting machine.
20. Stitoh Length
Indicator
Fi g. 19. Stitoh Len gt h Button Regulator
PRESSER FOOT PRESSURE
TURN TO-=-=-=
ADJUST
Fi g. 21. Adjusting Pressure
The pressure on the material should be
as light as possible, while still suffi-
cient to insure correct feeding.
From the library of: Superior Sewing Machine & Supply LLC