D Optional automatic needle threader
* The Automatic Needle threader is a factory installed option.
If your machine has this option use the following
instructions:
- Raise the needle to its highest position
- Press lever (A) down as far as it will go
- The threader automatically swings to the threading position
(B)
-- Pass thread around thread guide (C)
- Pass the thread in front of the needle around the hook (D)
from bottom to top
- Release lever (A)
- Pull the thread through the needle eye.
I Attention:
Turn power switch to "0"!
i"
14
To Next Page
Loading...
