Singer 3820 - Free Motion Darning (for 3 Dial Models)

D Free motion darning (For 3 dial models)
* The darning foot is an optional accessory not included with
your machine.
Set the pattern selector dial to (!) on 20 stitch pattern model.
Set the pattern selector dial to (A) on 25 stitch pattern model•
Move the drop feed control to right to lower the feed dogs.
Remove the presser foot clamp (2).
Attach the darning foot to the presser foot holder. The lever
(A) should be behind the needle clamp screw (B). Press the
darning foot on firmly from behind with your index finger and
tighten the screw (C) (3).
First sew around the edge of the hole (to secure the threads)
(4). First row: Always work from left to right. Turn work by 1/4
and oversew.
A darning ring is recommended for easier sewing and better
results.
Note: Free motion darning is accomplished without the
sewing machine internal feed system. Movement of the
fabric is controlled by the operator. It is necessary to
coordinate sewing speed and movement of fabric.
Stitch width dial
@
Stitch length dial
Optional f I
darning foot | I
(Available from_ I
your local dealer) (_)
i
1
Note: Stitch
length cannot be
controlled with
dial as feed dogs
are lowered.
":.:i.:-:;:%i!:.i..
./;-.: ;:.:.
46