Singer 3820 - Connecting Machine to Power Source; Foot Control Operation

I--I Connecting machine to power source
Connect the machine to a power source as illustrated. (1)
This appliance is equipped with a polarized plug which must
be used with an appropriate polarized outlet. (2)
I Attention:
Unplug power cord when machine is not in use.
Foot control
The foot control pedal regulates the sewing speed. (3)
Attention:
Consult a qualified electrician if in doubt as to connect
machine to power source.
Unplug power cord when machine is not in use.
The foot control must be used with the appliance by 4C-
316B (110-120V area) / 4C-126G or 4C-326G (230V area)
4C-316C or 4C-326C (220-240V area) manufactured by
MATSUSHITA ELECTRIC (TAIWAN) CO., LTD.
Sewing light
Press main switch (4) for power and light on,
O
Polarized
Conductor Intended]" ° _-J
to be grounded _" .J
2
IMPORTANT NOTICE
This appliance has a polarized plug (one blade is wider than the other).
To reduce the risk of electric shock, this plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Do not modify the plug in any way.
6