D Darning
• Turn stitch length dial to the desired length.
• Turn stitch selector to straight stitch, center needle position.
• Position the fabric to be darned under the presser foot
together with the under laying fabric to be used.
• Lower the presser foot and alternately sew forward or
reverse using the lever.
• Repeat this motion until the area to be darned is filled with
rows of stitching.
For reverse sewing instructions, see page 19.
All purpose foot
Stitch display
(For 3 dial 25 stitch model)
Stitch length dial
i-
_(For 2 dial model)
(For 3 dial 20 stitch model)
\
49
To Next Page
Loading...
