Singer 3820 - Blind Hem;Lingerie Stitch (for 3 Dial Models)

D Blind hem/lingerie stitch (For 3 dial models)
For hems, curtains, trousers, skirts, etc.
#w_Blind hem for stretch fabrics position "F" on pattern
selector dial (25 stitch pattern model).
/L..J',Blind hem/lingerie for firm fabrics position /L_J_ on
pattern selector dial (20 stitch pattern model) and position "E"
on pattern selector dial (25 stitch pattern model).
Set the machine as illustrated (1).
Note:
For 2 dial model use pattern 8 (see page 22).
It takes practice to sew blind hems. Always make a sewing
test first.
Fold the fabric as illustrated with the wrong side uppermost
(2).
Place the fabric under the foot. Turn the handwheel forwards
by hand until the needle swings fully to the left. It should just
pierce the fold of the fabric. If it does not, adjust the stitch
width accordingly (3).
Adjust the guide (4) by turning the knob (5) so that the guide
just rests against the fold.
Sew slowly, guiding the fabric carefully along the edge of the
guide.
Stitch width dial
Stitch length dial
Blind hem presser foot
w
v
Stitch patterns
}
4
(Top of
machine)
26