Singer 6233 - Raising the Bobbin Thread

Raising
the
Bobbin
Thread
Once
the needle
has
been threaded and the
bobbin
placed
in the
bobbin case, the
bobbin
thread must be brought up through the hole in the needle
plate.
1. Hold needlethread
with
left
hand.
.
Turn hand wheel
slowly toward
you,
lowering
needle into hole in
plate.
2.
Continue to do
this until needle rises
above
needle
plate.
o
Pull
gently
on needle thread and bring
up
bobbin thread in a loop.
3. Open
loop with fingers to tind
end of
bobbin thread.
4.
Draw needle thread
through
left
side
opening
in
presser
foot.
r
Pull both threads
to back
of machine.
f
tFHl[i
iltffiilllt
13