Need help?Do you have a question about the Singer 7464 and is the answer not in the manual?
General| Type | Electronic |
|---|---|
| Sewing Speed | 750 stitches per minute |
| Dimensions | 15.5 x 7.5 x 12 inches |
| Needle Threader | Yes |
| Automatic Needle Threader | Yes |
| Buttonhole | 4-step |
| Accessories | Zipper foot, buttonhole foot, all-purpose foot, seam ripper, needle set, bobbins |
| Presser Feet Included | All-Purpose Foot, Zipper Foot, Buttonhole Foot, Button Sewing Foot |
Guide to activating test mode and identifying indicator lights for different models.
Details on needle movement and stitch length in Test Mode 1.
Details on needle movement and stitch length in Test Mode 2.
Details on machine operation and needle position in Test Mode 3.
Procedure to check the feed dog height using the hand wheel.
Steps for adjusting the feed dog height using a wrench and screw.
Procedure to check the needle bar height relative to the needle plate.
Steps to adjust the needle bar height using a hex screw driver.
Procedure to check needle clearance at both ends of the needle plate hole.
Steps to adjust needle position using an eccentric pin and wrench.
Procedure to check the needle clearance to the shuttle hook.
Steps to adjust needle position by moving the support shaft.
To Next Page