EasyManua.ls Logo

Singer 9340 - Sewing Blind Hems; Blind Hemming Techniques

Singer 9340
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
BLIND HEMS
B-11:
B-12:
Blind hem for woven fabrics
Blind hem for stretch fabrics
a
b
Fold the fabric as illustrated with the wrong
side uppermost.
Adjust the guide (b) by turning the knob (a)
so that the guide just rests against the fold.
Turn over the fabric.
5mm 5mm
Overcasting
stitches
Reverse
side
Reverse
side
Please Note: It takes practice to sew blind
hems. Always make a sewing test first.
1
Place the fabric under the foot. Turn the
handwheel counter-clockwise by hand until
the needle swings fully to the left. It should
just pierce the fold of the fabric. If it does
not, adjust the stitch width accordingly.
2
3
Sew slowly, guiding the fabric carefully
along the edge of the guide.
4
5
4
5
2 3
1
B-12B-11
F
2.5~4.0
1.0~2.0

Table of Contents

Related product manuals