Singer 9340 - Narrow Rolled Hem Foot; Creating Rolled Hems

50
NARROW ROLLED HEM FOOT
K
1 Fold the edge of the fabric over about 3mm
(1/8 inch), then fold it over again 3mm (1/8
inch) for about 5cm (2 inches) along the
edge of the fabric.
2 Insert the needle into the fold by rotating the
handwheel toward you, and lower the
presser foot. Sew several stitches and raise
the presser foot.
Insert the fabric fold into the spiral opening
of the rolled hem foot. Move fabric back
and forth until the fold forms a scroll shape.
3 Lower the presser foot and start sewing,
slowly guiding the raw edge of the fabric in
front of the rolled hem foot, guiding it
evenly into the scroll of the foot.
1.5~2.5
2
3
1
1
1
2
3
* The is an optional
accessory.
narrow rolled hem foot