SAFETY
GTJZ1412E&1414E&1412E Plus Operation Manual 3-5 © Jun 2020
NOTICE
Maximum climbing ability is suitable for machines
with platform retracted.
Maximum Slope:
GTJZ1412E: 25% (14°）
GTJZ1414E: 25% (14°）
1412E Plus: 25% (14°）
Climbing capacity means the maximum allowable tilt
angle of the machine when it is on solid ground and
the platform is only capable of carrying one person.
As the weight of the machine’s platform increases,
the machine’s climbing capacity reduces.
UNSAFE OPERATION
HAZARDS
At a minimum, operators must operate and maintain the
machine as stated in this manual and in the Mainte-
nance Manual in addition to following more stringent in-
dustry regulations and workplace rules. Never engage
in unsafe machine operation.
UNSAFE OPERATION HAZARDS
• Do not push any object outside
the platform. The maximum lateral
force allowed is:
GTJZ1412E: 400 N(90 lbf) indoor
only
GTJZ1414E: 400 N(90 lbf) in-
door/200 N(45 lbf)
outdoor
1412E Plus: 400 N(90 lbf) indoor
only
• Do not change any machine parts
that may affect safety and
stability.
• Do not replace key parts that af-
fect machine stability with differ-
ent weights or specifications.
• Do not change or modify moving
aerial platforms without the manu-
facturer’s written permission.
• On the platform, do not attach an
additional device for placing tools
or other materials to the guardrail.
This will increase the platform
weight, surface area and load.
• Do not put ladders or scaffolding
on the platform or any part of this
machine.
• Do not use the machine on any
mobile or movable surface or ve-
hicle. Ensure all tires are in good
condition, the slotted nuts tight-
ened and the cotter pins
complete.
• Do not use a battery that weighs
less than the original lead acid
battery(40 kg [88 lb]) or lithium
battery (160 kg [352 lb]). The bat-
tery not only provides power, it al-
so serves as a counterweight. The
battery is vital to maintaining the
stability of the machine.
• Do not place or attach any sus-
pended load onto any part of the
machine.
• Do not use the machine as a
crane.
• Do not use the platform to push
the machine or other objects.
To Next Page
Loading...
