Sinoboom GTJZ1412E - Fire, Explosion, and Chemical Hazards

SAFETY
GTJZ1412E&1414E&1412E Plus Operation Manual 3-7 © Jun 2020
COLLISION HAZARDS
• Pay attention to the field of sight
and the presence of blind spots
when moving or operating the
machine.
• Pay attention to the extended plat-
form when moving the machine.
• Check the work area to avoid
ground and overhead obstruc-
tions or other possible risks.
• Be sure to exercise caution when
using the platform controller and
chassis controller. Color-marked
directional arrows show the func-
tion of travel, lift and steering.
• Users must comply with user,
workplace and government rules
regarding the use of personal pro-
tective equipment (hard hats,
safety belts and gloves, etc.).
• Place the machine on level ground
or in a secured position before re-
leasing the brakes.
• Only lower the platform when
there are no people or obstruc-
tions in the area beneath it.
• Limit the speed of travel accord-
ing to ground conditions, crowd-
ing, gradients, the presence and
location of personnel and any oth-
er factors that may cause
collisions.
• Do not operate the machine on
any crane or overhead traveling
device unless the crane control is
locked or precautions have been
taken to prevent any potential
collision.
• Do not place your hands and arms
where they may become crushed
or trapped.
• Do not work in or under the plat-
form or near the scissor arms
when the safety lever is not in
place.
• Maintain good judgment and plan-
ning when using the controller on
the ground to operate the ma-
chine. Maintain proper distance
between operator, machine and
fixed object.
COLLISION HAZARDS
• Never operate a machine danger-
ously or for fun.
CRUSH HAZARDS
A potential crush hazard exists during movement of the
machine. Always keep body parts and clothing a safe
distance from the machine during machine operation.
CRUSH HAZARDS
• Do not place your hands and arms
where they may become crushed
or trapped.
• Do not work in or under the plat-
form or near the scissor arms
when the safety lever is not in
place.
• Maintain good judgment and plan-
ning when using the controller on
the ground to operate the ma-
chine. Maintain proper distance
between operator, machine and
fixed object.
EXPLOSION AND FIRE
HAZARDS
EXPLOSION AND FIRE HAZARD
Do not use the machine or charge the
battery in hazardous or potentially
flammable or explosive atmospheres.