© Jun 2020 3-8 GTJZ1412E&1414E&1412E Plus Operation Manual
SAFETY
DAMAGED MACHINE
HAZARDS
NOTICE
To avoid machine damage, follow all operation and
maintenance requirements in this manual and the
Maintenance Manual.
UNSAFE OPERATION HAZARDS
• Do not use the machine if it is
damaged or not in proper operat-
ing condition.
• Thoroughly inspect and test for all
functions of the machine before
use. Immediately mark and stop
damaged or faulty machines.
• Ensure that all maintenance oper-
ations have been performed in ac-
cordance with this manual and the
corresponding Maintenance
Manual.
• Make sure all labels are in place
and are legible.
• Ensure that the Operation Manual
and Maintenance Manual are
sound, easy to read and stored in
the storage compartment on the
platform.
BODILY INJURY HAZARDS
Always follow all operation and maintenance require-
ments in this manual and the .
UNSAFE OPERATION HAZARD
Do not operate the machine when
there are oil spills/leaks. Oil spills or
leaks in hydraulic fluids may pene-
trate and burn the skin.
NOTE: The operator must carry out maintenance dur-
ing the pre-operation inspection only. During operation,
keep the left and right doors of the chassis closed and
locked. Only trained service personnel can open the left
and right doors to repair the machine.
BATTERY HAZARDS
FIRE AND EXPLOSION HAZARD
• Batteries contain sulfuric acid and
generate explosive mixtures of
hydrogen and oxygen gases.
Keep any device that may cause
sparks or flames (including
cigarettes/smoking materials)
away from the battery to prevent
explosion.
• Do not touch the battery terminals
or cable clips with tools that may
cause sparks.
BATTERY HAZARD
Always wear protective glasses or
goggles and protective clothing
when working with batteries. Remove
all rings, watches and other
accessories.
CHEMICAL BURN HAZARD
Avoid spilling or contacting battery
acid with unprotected skin. Seek
medical attention immediately if
battery acid contacts skin.
BATTERY HAZARD
• Do not use any battery charger
greater than 24VDC to charge the
battery. Only connect the charger
to a grounded three-wire AC
outlet. Be sure the charger is in
proper operating condition before
using.
• Be sure to use the appropriate
number of personnel and proper
lifting methods when changing
the battery.
To Next Page
Loading...
