© Jun 2020 A-2 GTJZ1412E&1414E&1412E Plus Operation Manual
DECALS/NAMEPLATES INSPECTION
Tip-over hazards-
Never use machine
during strong, gusty
wind
Tip-over hazards-
Never use machine
during strong, gusty
wind
Tip-over hazards-
Never leave chassis
door open
Tip-over hazards-
Never push or pull ob-
jects outside platform
Tip-over hazards-
Never suspend objects
from platform
Tip-over hazards-
Never place ladders
and scaffolding on the
platform
Collision hazards-
Never lower extended
platform without check-
ing for nearby
obstacles
Collision hazards-
Never raise platform
without checking for
overhead obstacles
Crushing hazards-
Keep hands away form
nearby obstacles when
raising platform
Crushing hazards-
Keep hands away form
scissor arms when
lowering platform
Fall hazards-Never
climb on guardrails of
platform
Fall hazards-Never
climb on scissor arms
Battery charging plug Platform power plug Emergency lowering
handle position
Open the safety arm The platform moves up
and down
Maximum height of
platform
Indoor use Outdoor use
The side force Electrocution hazards Wear protective cloth-
ing and glasses
Battery explosion
hazard
No smoking
No smoking Only professional
maintenance person-
nel can start the
maintenance
Improve point Lashing points Tire to ground load
To Next Page
Loading...
