Page 8 | 45
Fabric Filter Control
•
Straightforward filter leak detection on an ALERT and ALARM signal
base
•
Filter performance monitoring and optimization on the mA output
signal
•
Minimize product loss by finding even the smallest leakages
•
Identify broken solenoid valves
•
Monitor pulse efficiency and reduce pulse rates
•
Reduce consumption of compressed air
•
Enable preventive maintenance
•
Proactively reduce emergency downtime
Extraction and Air Circulation Systems
•
Help improve clean air working conditions
•
Compliance with regulations by monitoring the return air
•
According to EN12779 each wood shop which operates an air
circulation system bigger than 10.000 m3/h needs to be
continuously monitored
•
Control of the weld fumes removal process
•
Immediate alarm in case of filter malfunction
Measuring in hot conditions such as Steel-, Cement-, Chemical Production or Power Plants
• Detect damage in coke oven walls to avoid exhaust gases from
leaking into the flue gas
• Different probes and coatings allow the measuring of
particulate matter in harsh industrial conditions to up to
700 0C and 6000 kPa
• Conductive and sticky dusts as in e.g. carbon black
applications can be measured with teflon coated
probes
• Abrasive dusts as in e.g. steel manufacturing processes can
be measured by using diamond coated probes
Continuous Particulate Stack Measurements
•
Emissions monitoring in small and medium sized stacks
•
Enables power plants <50 MW to be compliant with
the EU directive 2010 / 75 / EU / IED, art 32
•
US-EPA, OSHA or other local authorities often
require continuous measurements parallel to
periodic gravimetric samplings
To Next Page
Loading...
