SBOX-2300 / VBOX-3130 Manual
37
ControlKeys
Power on the computer and the system will start POST (Power On Self Test)
process. When the message below appears on the screen, press (DEL) key to
enter Setup.
<↑>
Move to the previous item
<↓>
Move to the next item
<←>
Move to the item in the left hand
<→>
Move to the item in the right hand
<Enter> Select the item
<Esc> Jumps to the Exit menu or returns to the main menu from a
submenu
<+/PU> Increase the numeric value or make changes
<-/PD> Decrease the numeric value or make changes
<F1> General Help
<F3> Load Optimized Defaults
<F4> Save all the CMOS changes and exit
GettingHelp
After entering the Setup menu, the first menu you will see is the Main Menu.
MainMenu
The main menu lists the setup functions you can make changes to. You can use
the arrow keys (↑↓) to select the item. The on-line description of the highlighted
setup function is displayed at the bottom of the screen.
Sub‐Menu
If you find a right pointer symbol (as shown in the right view) appears to the left
of certain fields that means a sub-menu can be launched from this field. A sub-
menu contains additional options for a field parameter. You can use arrow keys
( ↑↓ ) to highlight the field and press <Enter> to call up the sub-menu. Then you
To Next Page
Loading...
