SIRETTA SNYPER-LTE graphyte - Page 26

Registered in England No. 08405712
VAT Registration No. GB163 04 0349
Siretta Ltd
Basingstoke Road
Spencers Wood
Reading
Berkshire RG7 1PW
sales
email
web
+44(0)118 976 9000
sales@siretta.com
www.siretta.com
26
SNYPER-LTE Graphyte
User Manual
Download Latest Edition
Rev 1.7
Show Summary
Highlight ‘Show Summary’ by using the UP and DOWN buttons, and press OK. The
SNYPER Graphyte will display the number of cells by cellular network, technology,
and signal strength. Use the LEFT/ RIGHT buttons to switch between signal strengths
received on the device.
Press the DOWN button to view the summary of results in GSM, UMTS and LTE.
Figure 27. Displaying survey results
Save Results
With default settings, this menu option will not appear as survey results will
automatically be saved at the completion of the survey. However, there is a setup
option to turn auto save off, in which case the Save Results option appears at the
completion of a survey. Use the UP/DOWN buttons to select Save Results and press
the OK button to save the results, otherwise the survey results will be lost when the
BACK button is pressed.
NOTE:
Multiple listings may be shown for a network operator. The listing is
created by the MCC and MNC, and multiple MCC / MNC’s may be
assigned to the same network operator. This usually occurs because
of network mergers and can therefore be country specic.
The network names database is actively maintained by Siretta.
However, it is impossible to follow what is happening with the network
operators worldwide so it is possible that in rare cases either the
wrong operator name is displayed (in the case of a network being
renamed) or an unknown network being discovered (if a new network
operator starts operating in the region).
If this happens, in the rst case please update the rmware in the
SNYPER Graphyte as the latest rmware also has the latest netnames
database. If the network name is still incorrect, please put the SNYPER
Graphyte into debug mode (see page 35) and repeat the survey. Send
both the survey and the log le to ‘support@siretta.com’ so that the
problem/unknown network can be corrected in the database.