Sirona C3+ - Accessories

3 Electromagnetic compatibility Sirona Dental Systems GmbH
Installation Requirements C3
+
, C4
+
, C4
+
Cart
60 27 945 D3382
32 D3382.021.02.12.02
båÖäáëÜ
•The UNIT may be operated only with accessories and
spare parts approved by Sirona. Unapproved accesso-
ries and spare parts may lead to an increased emission
of or a reduced immunity to interference.
•The UNIT should not be operated immediately adjacent
to other devices. If this proves to be unavoidable, the
UNIT should be monitored to check and make sure that
it is used properly.
The EMC measurements were performed with the following
PC:
3.1 Accessories
Making the PC connection
Designation of interface cables
to the PC
Supplier
XGA cable, 10m (L38) Sirona
S video cable, 10m (L15) Sirona
RS232 cable, 10m (L37) Sirona
Audio cable, 10m Sirona
FireWire, 10m
(for the CEREC-PC)
Sirona
2nd protective ground wire 2,.5mm
2
, 10m Sirona
PC as peripheral device
for checking the interfaces
with:
Siemens Fujitsu,
Pentium IV, 3.0 GHz
Extension of the PC
Graphics card NVIDIA GeForce 7300 LE
Frame grabber card PicPort Color frame grabber
card (Leutron)
REF 46 93 961