- 17 -
CUTTING WIDTH
The proper cutting width differs with the type of fabric. Check the seams each time, and adjust the
cutting width as follows.
1. Turn the hand wheel toward you until the needles are at the lowest position.
2. Open the front cover and free arm.
3. Turn the cutting width adjustment knob until the looper threads lie along the edge of the fabric.
Adjust to a narrower cutting width if the fabric edges curl when sewing. Turn the cutting width
adjustment knob to the right.
Adjust to a wider cutting width if the thread loops off the edge of the fabric. Turn the cutting width
adjustment knob to the left.
[ THE PROPER CUTTING WIDTH ]
[ ADJUST TO A WIDER CUTTING
WIDTH ]
Needle plate
Cutting width
adjustment knob
Wide
Narrow
Stitch width
Cutting width
Front side
[ ADJUST TO A NARROWER
CUTTING WIDTH ]
Front side
Front side
Threads looping
off edge of fabric
Stitch curling
edge of fabric
To Next Page
Loading...
Need help?
General
