- 27 -
BLIND HEM/LACE FOOT: SP-750419002
One foot for both blind hem and lace sewing.
BLIND HEM: The hem is trimmed, serged and sewn in one operation.
LACE: For sewing lace or borders together or onto a workpiece.
1. Placing the work under the foot. Fold the fabric and insert it under the presser foot.
2. How to sew:
a. Apply the adjustment dial (1) to adjust the guide plate (2) to the left or right until the fold of the
fabric is in line with needle.
b. Sew the fabric so that the fold is always against the guide.
c. Open out the fabric and press lightly on the wrong side.
Preparing the machine
Differential feed setting: Set at “N” position
Stitch length: 3 to 4
Thread tension: Standard setting
Needle: Remove the left needle use the right needle only
Fabric
Fold the fabric and insert
it under the presser foot
Fabric
To Next Page
Loading...
Need help?
General
