- 29 -
SHIRRING FOOT: SP-750507008
This special sewing foot is used for joining two pieces of fabric and shirring the bottom layer in one
operation.
1. Raise the sewing foot.
2. Set needle at its highest position.
3. Place bottom fabric layer (1) between needle plate and shirring foot, and insert up to upper knife.
4. Place top fabric layer (2) in opening (3) flush with the bottom layer (face side to face side) and
insert up to stop (4).
5 Lower the sewing foot.
6 Make a sewing test.
Please refer to SIRUBA website http://www.siruba.com
for Option Attachment.
Preparing the machine
Differential feed setting: Set at G
Stitch length: 3 to 4
Needles: Two or one
Needle thread tension: Standard setting
3
4
2
1
To Next Page
Loading...
Need help?
General
