Siruba HSO-747D User Manual

- 28 -
CORDING FOOT: SP-750438007
This special sewing foot is used for sewing a cording tape between two layers of fabric in one
operation.
1. Raise the sewing foot.
2. Set needle at its higest position.
3. Place bottom layer (1) cording tape (2) and top layer (3) (face side to face side) together under
the sewing foot flush, and insert up to the upper knife.
4. The cording (piping) must be placed in guide (4).
5. Lower the sewing foot.
6. Make a sewing test.
Preparing the machine
Differential feed setting: Set at “N” position
Stitch length: 3 to 4
Needle: Two needles or left one
Thread tension: Standard setting
4
3
2
1

Siruba HSO-747D Specifications

General

Brand	Siruba
Model	HSO-747D
Category	Sewing Machine
Language	English